rpierce000 Posted April 14, 2011 Share Posted April 14, 2011 Has anyone built a commercial Kato to Tomix connector track? I can see how to make one, but a prebuilt would be nicer... Link to comment
westfalen Posted April 14, 2011 Share Posted April 14, 2011 Kato 20-045 is what you're looking for. http://www.1999.co.jp/eng/image/10003037a/20/1 Kato call it a snap track conversion track but Tomix track fits right in, I guess Kato don't want to mention their competitor by name. Link to comment
Howard1975 Posted April 14, 2011 Share Posted April 14, 2011 You could use Kato part 20-045. It is designed to connect Kato and Tomix track systems. Link to comment
brill27mcb Posted April 15, 2011 Share Posted April 15, 2011 More info and options here: http://www.trainweb.org/tomix/intro/intro.htm#adapter Rich K. Link to comment
Barobutt Posted April 17, 2011 Share Posted April 17, 2011 Hey guys, I made a huge mistake... On previous layouts I always just made level crossings with plaster. I'd cover over the area in plaster nice and smooth and level then I'd drag some wheels over it a few times to dig in the ruts for the wheels. Once dry I'd use some little dental tools to clean out these grooves and make them flawless for trains to pass through. For some reason this method just isn't working for me for my tram I'm trying to build. The edges are crumbling, and even with over 1mm wide channels my trains do not enjoy running on them. So I dug all the plaster out from the center of the track and started cutting styrene strips. I cut 7mm wide strips and they work perfect. Exactly correct height and the width seems perfect too. The only problem is the curves. I've spent the last 2 hours trying to cut a perfect curve piece for my 103mm track and I just can't do it, it never turns out... So my question is: does tomix sell the "covers" for its wide-tram system separately? Am I going to have to buy a few packages of widetram track just to get a single part? Does anyone have any ideas on how to solve my problem? The straight sections I can do no problem, but the curves have me ready to cry! Link to comment
ToniBabelony Posted April 17, 2011 Share Posted April 17, 2011 So my question is: does tomix sell the "covers" for its wide-tram system separately? Yes, they do actually: http://www.1999.co.jp/eng/10104805 http://www.1999.co.jp/eng/10050215 Link to comment
Barobutt Posted April 17, 2011 Share Posted April 17, 2011 Ah that's good... but I only need 1 part from it, the 103mm curve. The rest would be pretty much useless for me :( I just need 360 degrees of 103mm curve cover. Link to comment
Joe Freese Posted May 4, 2011 Share Posted May 4, 2011 For a source for Tomix Fine Track, may I suggest Tenshodo (overseas@tenshodo.co.jp). I have ordered from them for quite a few years. Their service is excellent, and no one packs models so well. Also, they will ship EMS or "regular" mail which is much less expensive. I am not sure, but I believe they also may give a discount. Some years ago I built an N Gauge Japanese layout using Kato UniTrack. It worked well, but this time I am going with the Tomix Fine Track because of the greater versatility and greater variety of track pieces. Also, I like the smaller profile of the Tomix roadbed. I will be using the structures from the previous layout. I do not anticipate a problem with the Kato island platforms, as I will use small Tomix track pieces to adjust the spacing between tracks. I notice that most of the messages in this section are from 2008, so perhaps this information is a bit late for some of you. Link to comment
CaptOblivious Posted May 6, 2011 Author Share Posted May 6, 2011 For a source for Tomix Fine Track, may I suggest Tenshodo (overseas@tenshodo.co.jp). I have ordered from them for quite a few years. Their service is excellent, and no one packs models so well. Also, they will ship EMS or "regular" mail which is much less expensive. I am not sure, but I believe they also may give a discount. Some years ago I built an N Gauge Japanese layout using Kato UniTrack. It worked well, but this time I am going with the Tomix Fine Track because of the greater versatility and greater variety of track pieces. Also, I like the smaller profile of the Tomix roadbed. I will be using the structures from the previous layout. I do not anticipate a problem with the Kato island platforms, as I will use small Tomix track pieces to adjust the spacing between tracks. I notice that most of the messages in this section are from 2008, so perhaps this information is a bit late for some of you. This is a good email address to have. I have ordered from Tenshodo before, but only through their Rakuten store. Cutting out the middle man would be nice. And, you are right: No-one packs like they do! It's like my birthday everytime I get something from them! http://akihabara.artificial-science.org/files/2009/08/DSCN3976.jpg Link to comment
Tecchan Posted May 6, 2011 Share Posted May 6, 2011 For a source for Tomix Fine Track, may I suggest Tenshodo (overseas@tenshodo.co.jp). I have ordered from them for quite a few years. Their service is excellent, and no one packs models so well. Also, they will ship EMS or "regular" mail which is much less expensive. I am not sure, but I believe they also may give a discount. Some years ago I built an N Gauge Japanese layout using Kato UniTrack. It worked well, but this time I am going with the Tomix Fine Track because of the greater versatility and greater variety of track pieces. Also, I like the smaller profile of the Tomix roadbed. I will be using the structures from the previous layout. I do not anticipate a problem with the Kato island platforms, as I will use small Tomix track pieces to adjust the spacing between tracks. I notice that most of the messages in this section are from 2008, so perhaps this information is a bit late for some of you. This is a good email address to have. I have ordered from Tenshodo before, but only through their Rakuten store. Cutting out the middle man would be nice. And, you are right: No-one packs like they do! It's like my birthday everytime I get something from them! http://akihabara.artificial-science.org/files/2009/08/DSCN3976.jpg They pack the box with a simple paper?? No cardboard box, bubbles or styrofoam to protect it? Link to comment
rankodd Posted May 6, 2011 Share Posted May 6, 2011 I suspect that what's actually shown there is the wrapping they put on the individual boxes before they're packed for shipping. The Japanese are obsessed with presentation - I've had book store clerks wrap the cover of the book I bought like a second dust jacket. Link to comment
nightshade Posted October 25, 2011 Share Posted October 25, 2011 I've had book store clerks wrap the cover of the book I bought like a second dust jacket. that would be normal (even when u buy used stuff dc'c dvd's etc "book off" it will be in perfect order even with the orgilal lables the go on the outside od the pakaging with price tag :) ) Link to comment
rpierce000 Posted November 2, 2011 Share Posted November 2, 2011 For those of you not yet aware of this, BT Trains now carries most of the Tomix Fine Track line IN STOCK, in Seattle, WA. If you need Tomix track you can shop right here in the USA and pay much lower shipping fees. Come take a look! www.bttrains.com Link to comment
Tecchan Posted November 2, 2011 Share Posted November 2, 2011 For those of you not yet aware of this, BT Trains now carries most of the Tomix Fine Track line IN STOCK, in Seattle, WA. If you need Tomix track you can shop right here in the USA and pay much lower shipping fees. Come take a look! www.bttrains.com I just wish there was a better shipment deal available for Europe. Too bad. Link to comment
wasunka Posted November 3, 2011 Share Posted November 3, 2011 Okay, tried this, don't think it took, so try, try again . . . Has anyone tried cutting back the curved side of a Tomix R280-30 turnout? I need a short turnout with about 15 degree curved section. R140's are too small a radius, the R541-15's are too long, and the R280-30's bend too far. (Sigh.) Thanks, Joe Link to comment
keitaro Posted November 3, 2011 Share Posted November 3, 2011 Okay, tried this, don't think it took, so try, try again . . . Has anyone tried cutting back the curved side of a Tomix R280-30 turnout? I need a short turnout with about 15 degree curved section. R140's are too small a radius, the R541-15's are too long, and the R280-30's bend too far. (Sigh.) Thanks, Joe i wouldn't cut it back you will loose power on the cut section. under the turn out is a board that help control power to the track. Link to comment
Densha Posted May 19, 2012 Share Posted May 19, 2012 Just a quick question: is it possible to use Tomix switches with built-in motors with the Kato switch controller (that blue thing that you have to attach to the analog controller)? Link to comment
KenS Posted May 19, 2012 Share Posted May 19, 2012 They're both two-wire solenoid switches operating on 12V DC, so I'd expect them to work identically and thus you could use one's control with the other's switch. I haven't actually tried it though. And, of course, the connectors are incompatible, so you'd need to cut and splice wires. Link to comment
Densha Posted May 19, 2012 Share Posted May 19, 2012 Thanks, good to know that. Kato sells those connector cables separately, and attaching them to each other is no problem for me. Link to comment
tgv_obsessed Posted May 26, 2012 Share Posted May 26, 2012 Kato likes 66mm track centers for their platforms. Joe, thanks that's useful information to know! How wide is Unitrack? FineTrack is 18.5mm wide, allowing for platforms 37mm wide (at 55.5mm center-to-center spacing). Unitrack is 25mm wide. Which makes Kato island platforms 41mm wide. Just a hair too wide for FineTrack, but perhaps the ambitious modeler could rectify that… More ambitious than I am. the issue here is that the Kato Island platform fits between double spacing, the Tomix one fits between 1.5 spacing - so 66mm for Kato and 55mmm for Tomix the solution is not to cut the platform, but to make the spacing wider - and it is so so easy: both track systems use a straight at 15 degrees to increase their spacings by half- for Kato you use a 64mm and for Tomix you use 72.5. Conveniently both correspond to the length of a half straight used along the horizontal- for Kato thats 62mm, for Tomix thats 70mm So, to fit Kato station where a Tomix one would go, you add an extra 72.5 coming from the point (there is probably already one there- just add to it) and a 70 along the horizontal. Of course you need to do that at both ends of the station if it is a through station. then the Kato station fits very well, albeit with a few mm to spare- but that is probably a good thing Link to comment
CaptOblivious Posted November 11, 2012 Author Share Posted November 11, 2012 Does anyone, Tomix included, make single- or double-track viaducts for the Mini/Supermini radii Sidetrack? Link to comment
bill937ca Posted November 11, 2012 Share Posted November 11, 2012 Not Tomix. The only chance is a small vendor like Flor Verde. Here`s one but its not curved. http://www.1999.co.jp/eng/10197412 EDIT: Under B-train shorty track & structure on HS you will find some very short deck and gutter bridges by Cosmic-- all about to be released with reservations closed. But again they are all straight--but very short. http://www.1999.co.jp/eng/10130178 http://www.1999.co.jp/eng/10130174 Link to comment
CaptOblivious Posted November 11, 2012 Author Share Posted November 11, 2012 Not Tomix. The only chance is a small vendor like Flor Verde. Here`s one but its not curved. http://www.1999.co.jp/eng/10197412 yeah, its the curved part that is important, really. And I'm looking for viaduct rather than something like a girder bridge. Even plans for a DIY project would be welcome. Link to comment
bill937ca Posted November 11, 2012 Share Posted November 11, 2012 Its G scale, but the concept might work. Its straight, but you get the rhythm of the arches. http://www.btcomm.com/trains/primer/bridges/viaduct/simple_foam_viaduct.htm Link to comment
disturbman Posted November 11, 2012 Share Posted November 11, 2012 Jerry at Quintopia had scratchbuilded himself a curved viaduc a while back. You should check it out. http://www.quinntopia.com/2009/12/viaduct-and-city-updates.html Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now