Jump to content

Tomix Wide Tram Track For XTrackCAD


Recommended Posts

For those of you who use XTrackCAD and would like to use Tomix wide tram tracks, here are the required parameter files and instructions on installing them.

 

Firstly locate the following folder:  C:\Program Files\XTrkCAD 4.0.3a\share\xtrkcad\params

Next, locate the file called:   tomix-n

Make a copy of this file (just in case)

Open the file, I use notepad.

Copy the text file from below

Paste in the copied text BELOW the line highlighted in red (see "Param Files" picture)

Save and close the file

 

Open XrackCAD and the tram tracks will appear in the start of the track selector bar (see "Track" picture)

 

The track can be seen in the "Plan" picture

 

Here are the parameter text files.

 

TURNOUT N " Tram S 18.5 "

U "Straight Section" "" "" "Tram S 18.5" "" 0.728346 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 0.728346 0.000000 90.000000

S 0 0.000000 0.000000 0.000000 0.728346 0.000000

L3 0 0.010417 -0.000002 -0.669291 0 0.728345 -0.669291 0

L3 0 0.010417 0.000000 0.669292 0 0.728346 0.669292 0

END

TURNOUT N " Tram S 37.5 "

U "Straight Section" "" "" "Tram S 37.5" "" 1.476378 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 1.476378 0.000000 90.000000

S 0 0.000000 0.000000 0.000000 1.476378 0.000000

L3 0 0.010417 -0.000002 -0.669291 0 1.476376 -0.669290 0

L3 0 0.010417 0.000000 0.669292 0 1.476378 0.669293 0

END

TURNOUT N " Tram S 47.5 "

U "Straight Section" "" "" "Tram S 47.5" "" 1.870079 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 1.870079 0.000000 90.000000

S 0 0.000000 0.000000 0.000000 1.870079 0.000000

L3 0 0.010417 -0.000002 -0.669291 0 1.870077 -0.669289 0

L3 0 0.010417 0.000000 0.669292 0 1.870079 0.669294 0

END

TURNOUT N " Tram S 70 "

U "Straight Section" "" "" "Tram S 70" "" 2.755906 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 2.755906 0.000000 90.000000

S 0 0.000000 0.000000 0.000000 2.755906 0.000000

L3 0 0.010417 -0.000002 -0.669291 0 2.755904 -0.669288 0

L3 0 0.010417 0.000000 0.669292 0 2.755906 0.669295 0

END

TURNOUT N " Tram S 140 "

U "Straight Section" "" "" "Tram S 140" "" 5.511811 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 5.511811 0.000000 90.000000

S 0 0.000000 0.000000 0.000000 5.511811 0.000000

L3 0 0.010417 -0.000002 -0.669291 0 5.511809 -0.669284 0

L3 0 0.010417 0.000000 0.669292 0 5.511811 0.669299 0

END

TURNOUT N " Tram C 103/30 "

U "Curved Section" "" "" "Tram C 103/30" "" 4.055118 30.000000 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 2.027558 0.543282 60.000000

C 0 0.000000 -4.055118 0.000005 4.055118 150.000076 30.000000

A3 0 0.010417 4.724410 0.000005 4.055118 0 150.000076 30.000000

A3 0 0.010417 3.385827 0.000005 4.055118 0 150.000076 30.000000

END

TURNOUT N " Tram C 103/60 "

U "Curved Section" "" "" "Tram C 103/60" "" 4.055118 60.000000 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 3.511834 2.027556 30.000000

C 0 0.000000 -4.055118 0.000005 4.055118 120.000076 60.000000

A3 0 0.010417 4.724410 0.000005 4.055118 0 120.000076 60.000000

A3 0 0.010417 3.385827 0.000005 4.055118 0 120.000076 60.000000

END

TURNOUT N " Tram C 140/30 "

U "Curved Section" "" "" "Tram C 140/30" "" 5.511811 30.000000 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 2.755903 0.738441 60.000000

C 0 0.000000 -5.511811 0.000007 5.511811 150.000076 30.000000

A3 0 0.010417 6.181103 0.000007 5.511811 0 150.000076 30.000000

A3 0 0.010417 4.842520 0.000007 5.511811 0 150.000076 30.000000

END

TURNOUT N " Tram C 140/60 "

U "Curved Section" "" "" "Tram C 140/60" "" 5.511811 60.000000 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 4.773366 2.755901 30.000000

C 0 0.000000 -5.511811 0.000007 5.511811 120.000076 60.000000

A3 0 0.010417 6.181103 0.000007 5.511811 0 120.000076 60.000000

A3 0 0.010417 4.842520 0.000007 5.511811 0 120.000076 60.000000

END

TURNOUT N " Tram C 177/30 "

U "Curved Section" "" "" "Tram C 177/30" "" 6.968504 30.000000 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 3.484249 0.933601 60.000000

C 0 0.000000 -6.968504 0.000009 6.968504 150.000076 30.000000

A3 0 0.010417 7.637795 0.000009 6.968504 0 150.000076 30.000000

A3 0 0.010417 6.299212 0.000009 6.968504 0 150.000076 30.000000

END

TURNOUT N " Tram C 177/60 "

U "Curved Section" "" "" "Tram C 177/60" "" 6.968504 60.000000 1.338583 0.010417 0

P "Normal" 1

E 0.000000 0.000000 270.000000

E 6.034898 3.484247 30.000000

C 0 0.000000 -6.968504 0.000009 6.968504 120.000076 60.000000

A3 0 0.010417 7.637795 0.000009 6.968504 0 120.000076 60.000000

A3 0 0.010417 6.299212 0.000009 6.968504 0 120.000076 60.000000

END

TURNOUT N " Tram X 37/90 "

U "Crossing" "" "" "Tram X 37/90" "" 1.456693 90.000000 1.456693 1.338583 0.010417 0

P "Normal" 1 0 2

E 0.000000 0.000000 270.000000

E 1.456693 0.000000 90.000000

E 0.728348 0.728346 360.000000

E 0.728345 -0.728346 180.000000

S 0 0.000000 0.000000 0.000000 1.456693 0.000000

S 0 0.000000 0.728348 0.728346 0.728345 -0.728346

L3 0 0.010417 -0.000002 -0.669291 0 0.045520 -0.669291 0

L3 0 0.010417 1.411170 -0.669290 0 1.456691 -0.669290 0

L3 0 0.010417 0.000000 0.669292 0 0.045522 0.669292 0

L3 0 0.010417 1.411171 0.669293 0 1.456693 0.669293 0

L3 0 0.010417 0.059057 0.728347 0 0.059057 0.682826 0

L3 0 0.010417 0.059053 -0.682824 0 0.059053 -0.728346 0

L3 0 0.010417 1.397640 0.728347 0 1.397640 0.682826 0

L3 0 0.010417 1.397636 -0.682824 0 1.397636 -0.728346 0

END

post-675-13569929491154_thumb.jpg

post-675-13569929491656_thumb.jpg

post-675-1356992949181_thumb.jpg

  • Like 1
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...