Andrew G Posted December 16, 2023 Share Posted December 16, 2023 (edited) Hello Folks, I'm trialling these magnetic couplers from the British manufacturer Westhill Wagon Works. The magnetic couplers are on the left. https://westhillwagonworks.com/14-hunt-couplings-elite-n They appear to be OK for 183mm radius curves on the Bandai B Train Shorty units, and I think that 150mm radius should be OK also. Edited December 16, 2023 by Andrew G 3 Link to comment
SwallowAngel Posted February 14 Share Posted February 14 Quick question: Anyone here got the measurements for the old Bandai Diesel Chassis? I was wondering wether or not I could just trim a KATO 4-axle Chassis to fit a DD51/DE10. While some heavy modification on the chassis seems neccesary, going off of pictures, it seems possible... Link to comment
Dinosbacsi Posted May 8 Share Posted May 8 Based on this video, it should fit I guess. Though it does seem to sit a bit high, but that might simply be because of the smaller bogeys used in the Kato chassis. Link to comment
Dinosbacsi Posted May 16 Share Posted May 16 So... is this a very good idea or a very bad one, lol? (might make a proper thread for it in the layout planning section if I ever make it a real thing) 2 2 5 Link to comment
cteno4 Posted May 16 Share Posted May 16 Super something to keep me entertained behind you at the stoplight! Looks good to go. Just need to run the controller up to the front see so you can run it via the rear view mirror (well I guess I was running a train won’t be an excuse when you rear end someone though…) jeff 1 Link to comment
lighthouse Posted May 17 Share Posted May 17 (edited) @cteno4 The controller could be the radio knob in the car or the centrifugal forces of cornering like a roller coaster?! In any case, you'll get a lot of attention, even from the police 😅 🚔🚨👮♂️👮♀️ If you're lucky, you can convince him of the idea and he'll play with it himself... Edited May 17 by lighthouse Link to comment
Kingmeow Posted May 17 Share Posted May 17 Need to figure out how to magnetize the wheels or tracks or both so you can run it WHILE driving. 🤣 1 Link to comment
cteno4 Posted May 17 Share Posted May 17 That’s what T scale trains do. But then you need steel wheels and rails. It is effective with tiny T scale as you can even run the trains upside down hanging from the rail. That won’t happen with n scale unless the wheels are made from rare earth magnets! There’s a thought maybe put some rare earth bar magnets in the bottom of the chassises and some plate steel under the track roadbed. jeff Link to comment
MeTheSwede Posted May 17 Share Posted May 17 (edited) There is already a large and convinently placed plate steel located above the engine of the car, so there's need to stare at the rear mirror any longer. The Traffic police should be happy about you looking out through the windscreen at all times. The windscreen wiper engines operate at 12V, so this is a perfect place to hook up the power for the model railway on the hood and the train can then be operated using the windscreen wiper switch on the steering wheel. 😁 Edited May 17 by MeTheSwede Link to comment
Dinosbacsi Posted May 17 Share Posted May 17 20 hours ago, cteno4 said: Super something to keep me entertained behind you at the stoplight! Looks good to go. Just need to run the controller up to the front I suppose having the trains set up on the track while on the go can't really work. Even if they are just stopped and not running, they would fly all over the place on bumps, lol. About the controller, it is 12V for N scale, right? In that case I could run the controller off the power of the cigar lighter. 7 hours ago, Kingmeow said: Need to figure out how to magnetize the wheels or tracks or both so you can run it WHILE driving. 🤣 That would be cool, lol. Link to comment
Zeether Posted May 24 Share Posted May 24 It looks neat, but I'd be really concerned if it got extremely hot in the car. Link to comment
Dinosbacsi Posted 16 hours ago Share Posted 16 hours ago On 5/24/2024 at 10:26 PM, Zeether said: It looks neat, but I'd be really concerned if it got extremely hot in the car. Yeah, I wonder how the plastic would hold up inside on a hot summer day. Link to comment
Zeether Posted 12 hours ago Share Posted 12 hours ago 4 hours ago, Dinosbacsi said: Yeah, I wonder how the plastic would hold up inside on a hot summer day. I wouldn't want to test that theory lol, I think it'd at least fade the colors from the sunlight Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now