cteno4 Posted October 12, 2024 Share Posted October 12, 2024 Interesting mobile retailer. Plop it in front of a train with derailed truck(s) and run the train thru it to retail all the trucks. Usually pretty easy to just pop trucks back on by hand, but some are harder to spot but train has to be able to keep moving with the derailed trucks for this to work. https://www.1999.co.jp/eng/11129951 jeff 1 Link to comment
bc6 Posted October 12, 2024 Share Posted October 12, 2024 I thought that was an interesting re-railer too. Link to comment
Kingmeow Posted October 12, 2024 Share Posted October 12, 2024 I'm going to try and pick one up when I'm there, just to try it out. Link to comment
Madsing Posted October 17, 2024 Share Posted October 17, 2024 Interesting, nice find, I’ll get one too. Link to comment
Welshbloke Posted October 26, 2024 Share Posted October 26, 2024 One idea for improving it - make the hoop so it can fold flat. Easier to tuck it in a stock box then. 1 Link to comment
cteno4 Posted October 26, 2024 Author Share Posted October 26, 2024 It does look like the handle can easily be detached from the base. jeff Link to comment
Welshbloke Posted October 27, 2024 Share Posted October 27, 2024 Yep, but not sure if that's a one time thing (as in it'll snap the pegs off if you try to dismantle it again). It looks as if the handle would be able to hinge down if it could pop back over the pegs. Neat design anyway, unfortunately I only saw it after placing my November order (Xmas train and the 5v controller) but there'll doubtless be plenty available. Link to comment
ilox Posted December 3, 2024 Share Posted December 3, 2024 I saw this on HobbySearch with much interest but my layout is mostly PECO and Fleischmann rack track. I am guessing that the PECO should be OK for it but I might have to have a modified one just for the Fleischman rack track (with cutouts to allow for the central rack). Does that sound doable? Link to comment
ilox Posted December 3, 2024 Share Posted December 3, 2024 On 10/27/2024 at 10:48 PM, Welshbloke said: (Xmas train and the 5v controller) Like you, I was thinking of grabbing a Pocket Train loco to run on my Wharf module plus the new 5V power controller, in my case the 10-504-3 Feight loco, but part of the wharf lines will have normally powered N consists running over it. Does the new 5-volt power supply unit for Pocket trains preclude the normal 12V train locos from being used on the wharf or am I getting mixed up on my power needs? Maybe I could have a dual voltage arrangement depending on which train I am running across that module at the time? I can just see that design of loco working a wharf scene plus it is quite a bit cheaper than the usual suspects with the two extra cars a scenic bonus. Link to comment
Ekiben Posted December 8, 2024 Share Posted December 8, 2024 A pretty good review, though I'll probably pass on this item (that sounds familiar, eh?) English captions are available on the video. https://www.youtube.com/watch?v=ejNUcDGy7eI 2 Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now