3D Printed B-Train Shorty Chassis.

[lukewang01]

I'm Luke. I've created this 3D printed part as an alternative for T-Kais. It can be used with KATO 10-097~099 bogie. I'm asking for 1 USD ea. and buyer pays shipping. 

 

Thingiverse webpage: https://www.thingiverse.com/thing:4769416

You may need to tinker around with print settings for a bit before getting it to work. I wouldn't recommend setting layer height too much thinner than 0.2mm because you may got problem with clips being too fragile. The bottom of the holes are really thin that I wouldn't recommend using rafts when printing because the bottom may stick onto the rafts.

 

 

figure 1: Bottom view

 

figure 2: Top view

 

figure 3: Comparison of bogie mounting hole by putting them against each other

 

Extra features like the slot for current collector can be added upon request. 

figure 4: Older design with current collector slots

 

The chassis in figure 4 is an older design which I didn't have the distance between the holes correctly and it gave me problem when I'm trying to motorize my Cassiopeia set. Now the new ones in figure 1,2,3 have the appropriate hole distances. 

 

Please share your thoughts and let me know what features should be added to the chassis.

Edited February 20 by lukewang01

[cteno4]

Luke,

 

thanks for doing this, really appreciated! great service to those of us that don’t have 3d printers yet. Loads easier that what I was looking at doing modifying the fixed truck chassis and the electrical connection slot is great to have to light trains in the future. Was thinking of looking at a simple wiper design for the Kato trucks to perhaps etch. 
 

I will definitely want some, I’ll go thru my unbuilt btrains this week and see how many I have of the fixed bogie chassis and what I could use.
 

Thanks again!

 

jeff

[lukewang01]

No problem. I want this project to help the community.

[Dinosbacsi]

This is great news to see this.

 

Though currently I will try to not spend too much and not buy more Shortys, but if I ever do, I'll definitely buy a few of these from you.

[lukewang01]

Good luck, I always have a hard time stopping if I see a really good deal on YAJ. 

[cteno4]

Shorties are kind of like popcorn... so easy to grab the models being usually not a lot of money and turn your brain off to the costs to get them running...

 

jeff

[metaldirtnskin]

Hi Luke,

 

I replied to the other thread but I must have found this at just the right time. I need to fit the Kato bogies to some of the shorty cars I bought, and I have a 3D printer but am not that advanced at CAD modeling yet. I would love to get a few of these - I'd buy them printed from you if you prefer that, or if you'd be willing to send the STL file I would happily compensate you for your efforts as this is clearly a long awaited solution to a problem. Either way, thanks...

[lukewang01]

I'm going to try and set up Thingiverse tomorrow and put the link here. If it doesn't work out, I'll PM you and we can discuss how to send you the .stl file.

[lukewang01]

11 hours ago, metaldirtnskin said:

Hi Luke,

 

I replied to the other thread but I must have found this at just the right time. I need to fit the Kato bogies to some of the shorty cars I bought, and I have a 3D printer but am not that advanced at CAD modeling yet. I would love to get a few of these - I'd buy them printed from you if you prefer that, or if you'd be willing to send the STL file I would happily compensate you for your efforts as this is clearly a long awaited solution to a problem. Either way, thanks...

I've updated the topic with webpage.

[gavino200]

Great project, Luke! What software are you using? Can you share a little about how you learned it and what kind of projects led to your current level of skill? Very impressive. 

[lukewang01]

I'm using Siemens NX. Learnt it from school. I'm also planning on learning Solidworks. There might be tutorials you can find on Youtube.

[lukewang01]

NX is not the best for this as it's not very intuitive. 

[tossedman]

Cool stuff Luke! Thanks for sharing this on Thingiverse. Even though I don’t really need another chassis at the moment, I couldn’t resist trying one out. The Kato bogies fit like a charm and bodies click right on. Great job sir! Here are a few pictures. 

 

 

Edited February 21 by tossedman

[lukewang01]

It looks amazing, looking at yours makes me want to change my 3D printer.😂

[tossedman]

Hey Luke,

 

It's all down to the good design. I printed this on a Prusa i3 MK3S at the 0.05 Ultra-detailed setting.

 

Cheers eh,

 

Todd

[metaldirtnskin]

Thanks Luke... I'm hoping to try printing a few this week. I have done some very basic designs in Fusion360 but nothing near as complex as this.