All Activity

Admin note: Yes please remember to only post your own images. If you have a contact with a manufacturer who is willing to allow use of their images here please contact forum admins about it before posting. Otherwise it’s just your own photos to be posted on the fourms. We have reached out to the main Japanese manufactures and suppliers in the past about posting their images here and they either didn't respond or didn't want their pictures posted here. Disturbman has gotten permission from some of the Chinese manufacturers to use their photos here on the forum so its our current exception to the forum rules. We just need to draw a hard line on this as exceptions and if its tuesday rules get so messy so fast to try to enforce. We just keep it simple to if its not your photo use a link instead. Embedding is allowed for the places that have auto embedding and right control of embedding like youtube, flickr, social medias, etc. thanks jeff

Yep if you are using the lighted platforms yes. From what i remember it should not be too hard to fuse your cut off platform to a full one and just add some little jumpers. You might even be able to wedge in the wire ends somewhere on the power rails if you dont want to solder them. you can cut with a hack saw to cut the plastic then metal. Just go flow and careful and cut a tad big. You can then sand it down clean. Easy way to get that flat and clean is to take a 10”piece of like 1x6 wood and put a small strip of wood across the piece of wood almost across the center and the end flush with one side of the larger piece of wood.. Put the platform on the wood against the strip of wood with just the bit of the bad end hanging out over the edge. You can then take a block of wood [like a small hunk of 2x4] with a piece of sandpaper over it and use the wood base to sand along its edge to squarely sand the platform edge. If you have access to a disc sander then it’s very easy to just ease the end of the platform onto the disc using the miter side to keep it perpendicular to the disc. Just go very slow. Only issue will be the pole spacing. If you could you squeeze in another 45mm piece into your platform length you could chop the platform into 2/3 and pole spacing remains the same then all the way down. Otherwise you will need to chop about 10-15mm off one end then cut it the same length longer in the middle to get that center pole out at the end of the platform as it resided dead center in the 248. jeff

@Lessigen Makes the CR200J Changing even more better though i ordered the other livery. Changming is more addictive than Tomix/Kato at some level. I got to say no to the upcoming train.

I’ve got a decent mix of Yos and Wafus in my fleet now, and I’m trying to determine when to pick which one when assembling freight trains. I’m guessing Wafus for local/branch lines, and full Yos for mainline freights?

From what the subtitles say starting at around 0:25, this was a static model that was converted into one with a motor using Kunter accessories. So very likely one made by a hobbyist.

Ok thanks. I guess if I wanted platform lighting I’d need to solder the rails together with short wires or similar- although I’m not decided on whether to do any lighting yet.

Amazing what a couple of little capacitors can do for an LED in a car! jeff

I’ve just cut the straight platforms down to the desired size. I used my mini table saw, but any razor saw would do the trick. You loose the ability of them to pop together with s joiners, but I didnt find that a problem. They could be glued together. For cutting in half the old platforms you could whack right in half as it was 4 uprights for the roof so split down the middle evenly. The newer ones are 3 poles so going to be a little trickier. You could whack evenly around 2 poles to get your 124 but the pole spacing will be off from the 248 section. No real way around this unfortunately unless you were to take out all the poles and respace them all the way down the platform. Or no roof solves the problem. jeff

My track plan includes provision for an island platform, very similar to that provided by the V1 track set, except it's 124mm shorter - i.e. the "long side" between the point straights consists of 3x248 and 1x124mm. I believe the island platform set needs 4x248mm on the long side. So my question is how easy is it to modify the island platform set to allow for this, and how would you do it? Do I need to resort to scratch building?!

Kofu, Yamanashi. https://maps.app.goo.gl/ZeKNpfWE3BqyuRmV8

Shiozaki Station. https://maps.app.goo.gl/zzhkDzDpa5avx6ys8 Not sure if that is Mount Fuji in the background, or a different mountain. Another one possibly in need of some rotation. The front of the train is slightly out of focus as well. I also finished uploading all my audio recordings to YouTube: https://youtube.com/playlist?list=PLWGz1gLVK2zDb8WYOBMxs9uDYyKB1IJuZ Looking at cameras. The Fujifilm x100vi seems like a good option for me, but I'm just not convinced that I'll be able to get good results with it. For some reason photography is something I struggle to get my head around.

He uses about twice as many seeds and twice as much sauce as I usually do! Maybe that's the secret. Those things are the greatest invention since sliced bread. I hate cabbage, except if it is shredded like that, in which case I love it!

It's by Ron Bearden, a stalwart in the US N-Scale scene.

Awesome! I never knew YouTube has that feature! Initially I turned on CC but of course it was Japanese CC. 🤣

@disturbman Thanks. I wasn’t aware there was another model. Looks great nonetheless. I saw on same channel the dcc equipped china trains with sound. l am assuming they are changming ones because its something i might get if it as good as in that video.

I already have seen Densha de go controller modifications to be used as a power controller, but I don't remember a plug and play box. Maybe that's a gadget and use a all in one controller is a better solution, but the link between model train and video games speaks to me. 🙂 As I as understand it support PS 1 and 2 controllers and USB ones.

Saw the bit about it but I have no idea who's making it

Congrats and good job! That chugging sound may be from one of those big outside gears not being round. I have an old Rivarossi PA that was built on the old Kato drives that you have. Mine went wump wump wump. I think I played with the mesh of the gears, by playing with the motor location - put more clearance between the gears on both sides. It's been a while.

From today's Globe & Mail: “The de minimis changes impact products made in China or Hong Kong regardless of where they are shipped from,” said Tom Gould, a customs and tariff strategy consultant. “If a company is warehousing products in Canada but the products were made in China, then these are subject to the China duty.” https://www.theglobeandmail.com/investing/personal-finance/article-small-businesses-us-duties-de-minimis-china-trump/

After running both for several hours yesterday, letting them rest for the day and running them this afternoon, they have both quieted down considerably. I guess that's going to be it for now as I don't want to take them apart just to see. But, I did find this guy's post on fixing a slipping gear: https://u18b.com/wp-content/uploads/2024/04/NW2-Manual-Kato-pdf.pdf He takes the thing completely apart and shows how to fix the gear issue that these things may have, in case anyone is interested.

Very much like the greenmax Sushi Zammai store. Needs to be holding the first tuna of the year though.

Coverage in text form if you prefer. The Tomix shorties look fun. can’t find any mention of a camera car (haven’t watched the videos though), who’s making it? https://mokeitetsu.com/event-summary/20250514-shizuoka

If you watch it on youtube its self (not imbedded) you can have it auto-translate:

Damn those popondetta LEDs are miles away from the Kato one. No more flicker (the 1522 with charger) Video

DF7 are releasing this week. The models come in three different liveries: light blue, dark blue and one model in orange. It also brings a few improvements over the previous models, and correctly model the floating tank under the model. To note, the handrails are all etched metal parts. (All pictures posted with Changming's permission)