Japan Rural Based Houses (N Gauge)

[Desy]

Hi guys I need your help

Where do you think I can find a 3D / STL file for structures and houses ready to be printed for my Japanese N Gauge rural based layout?

See attached image for reference:

 

 

 

[bill937ca]

Not a 3D file but Japanese farm houses from Tomix and TGW.

 

https://www.1999.co.jp/eng/10536131

https://www.1999.co.jp/eng/10031894

https://www.1999.co.jp/eng/10077789

 

Houses in the video are generally Tomytec. These are mostly from urban areas. 

https://www.1999.co.jp/eng/10864138

https://www.1999.co.jp/eng/10560278

https://www.1999.co.jp/eng/10560283

https://www.1999.co.jp/eng/10483639

https://www.1999.co.jp/eng/10136526

https://www.1999.co.jp/eng/10067408

https://www.1999.co.jp/eng/10483637

https://www.1999.co.jp/eng/10086010

 

Some traditional like houses that may have been houses at one time. These are often mixed in with houses.

https://www.1999.co.jp/eng/10106554

https://www.1999.co.jp/eng/10250660

https://www.1999.co.jp/eng/10250658

https://www.1999.co.jp/eng/10362794

[bill937ca]

Housing cluster photos from my old Kamakura layout circa 2019.

 

[Little-Kinder]

Sankei might have some stuff also

https://www.plazajapan.com/sankei-1/

[mwagner]

ready to print - maybe impossible. Here are some links. Surely you have to scale the size. I didn't print these models. So I don't know any issues.

https://www.thingiverse.com/thing:3991879

https://www.thingiverse.com/thing:3928018

https://www.thingiverse.com/thing:3899577

https://www.thingiverse.com/thing:4460864

 

I'd printed simple house-ish bodies in the past. Nothing fancy, still edited cubes with holes for the windows. And I'd built different houses attaching details, paint, etc. with the bodies. In this example (from left to right) the second building is based on body no 1. The first building ist based on body no 2. I've used body no 1 in the background (blue building) again.

 

 

Edited April 23 by mwagner

[cteno4]

Take a look at the basics of walls in greenmax, tomytec and sankei kits and you could easily adapt these in 3d as wall sections and just glue them together, this way simple printing flat and potential to mix and match wall bits. You can even do wall or building sections by the floor so you can just stack them up to the height needed and change things up some with different entrance and roof sections.

 

jeff