Track Height difference between Tomix levels

[unheated4723]

I'd like to know what the vertical spacing is between tracks on the 91043 "Double Track Hierarchical Station"
Similar to the 91044 as well.
Does anyone have this set or know the number?
I've googled, searched this forum, asked chatgpt etc but no luck so far.

I also looked at the product information, including on the tomix website (translated to english).

 

 

EDIT:
I measured 62.3mm for the height difference between the same points (like top-of-track to top-of-track, bottom to bottom etc)
Hopefully someone finds this useful in the future 😛

Edited February 1 by unheated4723
Update to answer the question I asked

[bill937ca]

The standard Tomix 3235 Concrete Pier set is 55mm high. Then add the height of the 3245 cross beam which I haven't yet found. My guess is 5mm (partly from memory). That would total 60mm.

Edited January 21 by bill937ca

[unheated4723]

Thank you @bill937ca. I was hopping to design a 3d printed piece to support an incline. I might have to just wait for my order to arrive so I can measure it haha.
I noticed after posting that the picture on the box has the e235 in the station, which I happen to own, so I used that for scale and got a height of ~65 to 67mm but I'm not 100% sure where the track lies since we can't see the track on the second level in that picture.
Anyway I will update once I have mine.