Crazy Spiral layout.. (as yet un-named)

[b.nice2000]

Started on a new compact layout with a footprint of 2.1m x 0.5m.

 

It will have multiple spirals at one end, linking 6 different levels.

 

Not sure what each level will be yet.. time will tell... 😉

 

Here are pics of the first 2 layers of the spiral section.

 

 

Edited April 19 by b.nice2000

[b.nice2000]

I have, however been toying with an idea for the bottom section,..

 

The back part will be behind scenery, and contain some set-up tracks.

 

The following images may give you an idea what I might do with this section.

 

 

 

 

Edited April 19 by b.nice2000

[N-Osoi]

Subscribed! 😄

[Cat]

Whee!

[b.nice2000]

Here is a rough idea of what might happen.... it is an "as I go" project, so who knows what might happen at each layer or what sort of "city" might get built.

 

I do have that spiral building from the Mt FooGee layout I could build and have it go up into the next level...

 

Might have an "all floors" elevator,  maybe a cable car or ski-lift as well.. lots of random ideas.. 🙂

 

Any kooky or strange suggestions duly considered.  🙂

 

 

[b.nice2000]

Rainy day, so I set to work on the subway station

 

90mm high with track either side of central platform with post supports for roof. Each section 200mm long

 

Escalator entrance and exit at either end.

 

Front arches for viewing, back wall has flat area for billboard signs etc.

 

The holes at the end are designed for a feed through LED rope light, Ceiling is arched and there are 4 rows of 3mm diameter holes in the ceiling.

 

 

[b.nice2000]

Subway station for Level 3 progressing nicely, I think.  🙂

 

 

 

 

ps.. Waiting for a bulk buy of track to arrive, then I can start looking at Level 2, which I haven't had an epiphany about yet, and the station on Level 3b, above the Underground station.

 

If you can follow the schematic above, the tracks from the Underground station loop around climb a bit and become the Overground tracks.

 

Actually.. just had a thought for Level 2...  I have a lot of "olde west" 3D models I could use.... hmmm... possibilities.  😉 

Edited April 26 by b.nice2000

[b.nice2000]

Added some lights

 

 

3 different colour still pics

 

Edited April 26 by b.nice2000

[Cat]

hmm, subways are always fun!

[b.nice2000]

Working on 3D print of top loop... This is a 110mm tall viaduct for 216 radius Kato Unitrack

 

Up track in on right outside.. down track out on right inside, so no point used, no reversing wiring required.

[b.nice2000]

Top Level [5] design with grey being Kato track and pink being the elevated viaduct.

 

Grey comes in from a spiral from Level4 [city] in the spiral chamber, and climbs enough to cross over itself on the way up through a simple loop in the spiral chamber, to the viaduct section which loops around then heads back down.

 

I think I'll hunt for interesting graffiti I can print and put on the outside of the viaduct walls.

 

Always looking for other wacky ideas if people have any.... or any long narrow graffiti pics that I might be able to use (preferably not names).

 

Also attached one example I will almost certainly use.  😉 

 

 

ps.. look what just arrived  🙂

 

Edited Monday at 01:47 AM by b.nice2000

[b.nice2000]

Another wet day, so I started designing 3D print for the Level 4 station, which sits directly above the subway station posted elsewhere.

 

Not finalised yet.. Think I might double the length of the building.

 

Edited Tuesday at 09:49 AM by b.nice2000

[b.nice2000]

Built the Level 6 viaduct to see if it will work.

 

Positioned it approximately where it will go.. Very happy with outcome 🙂

 

First pic is an overall pic.. rest are section pics...  probably need better lighting, but that will happen eventually 🙂

 

 

 

 

 

 

NOTE. decided viaduct is too tall.. lowering it by 2cm.. because I can. 🙂

Edited 16 hours ago by b.nice2000