I could use some help with these containers

[bc6]

I have these pretty cool container kits but I'm stumped on a couple of things.

Where do the tiny green clamp-looking things go? The clamp things go between two containers to kind of lock them together. 

Would you permanently install the bottoms onto the container with super glue or PVA glue?

 

 

Edited March 12 by bc6

[cteno4]

What kit is that?

 

jeff

[bc6]

These are the containers.

https://www.amiami.com/eng/detail/?gcode=RAIL-30735

[inobu]

Use little magnets.

 

Inobu

[cteno4]

Interesting little kits. Do you get 5 sets in a pack?

 

as for the clips I guess it’s in how you want to use them. Have you tried to see if the clip into Tomix or Kato kokis? 
 

PVA on plastic like this will work unless you give it a sharp bend like you might get fiddling with these and pop off. If you don’t want to use a more permanent cement and try these out try PVA and see if it works well enough for your use, you can always pop/soak off PVA and use something more permanent once you know how you want to use these.

 

i agree with Inobu, I’m always trying to use little magnets when I can, usually an elegant solution when it works.

 

jeff

[bc6]

Yes, they came 5 to a pack.

The clips are used to connect one container to another container.

I'm going to use PVA to secure the bottoms.

I'll look for some magnets as another solution.