Apartment 2 Japanese N-scale.. Alternate construction

[b.nice2000]

At Jeff's suggestion I did a remix using a stacked method..  

 

 Basic design stays the same, but it is printed in "floors". This means you can build it as high as you like.

 

 The sections are colour coded in the pic below, and can all be printed flat without support.  

 

 The top level has an angle support under the top piece so supports aren't required.

 

stl files are at  https://www.thingiverse.com/thing:6380492

 

Just realised, you need to put the doors into the base section (green) before you add the base top piece (light brown)

 

 And put the windows and window glass into your floor levels (pink) as you build upwards.

 

Again.. If you decide to build, please take a pic, and let me know of any issues.. I have not built this version myself.

Edited December 16, 2023 by b.nice2000

[cteno4]

Nice! I really like the Tomix apartment and office buildings you can pop apart by floors. Let’s you make it what ever height you want. Also had fun with the Tomix apartment building it was fun to also alternate the beige and red colored building floors.

 

also easier in make floors in smaller printers.

 

jeff

[b.nice2000]

Just added an alternative single floor level, 1.5 times the height (3 blocks vs original 2 blocks)

Comes with block front or flat front