My German Gauge 1 layout in the 90s

[kevsmiththai]

Although I'm mainly known for Z gauge these days back in the eighties and nineties my main interest in railway modelling was gauge 1 either in 1/32nd scale for German or 10mm to the foot for British outline.

 

I exhibited two gauge 1 exhibition layouts. Mardy Colliery was a representation of a typical National Coal board colliery with  small industrial locomotives and typical British four wheel wagons. It was immensely popular on the show circuit but had a fatal flaw in its construction and its days were numbered as the baseboard tops began to sag at an ever increasing rate. I had already started to build its replacement 'Gottersee' a German branch line based on the line to Frasdorf in Bavaria on which I was going to run my Marklin RTR locos and also my scratchbuilt German locos and wagons. As the terminal station on the line it would require some shunting on any train that arrived so there would always be some action.

 

Frasdorf station building

 

 

The view towards the loco shed

 

 

Construction started in earnest at the Sheffield '0' gauge group clubrooms and also at my workshop at home.

 

Track was to be Tenmille flexitrack with hand laid points including a three way point at the station throat. After the disaster with Mardy baseboard tops were plywood not chipboard and as will all my layouts the baseboards were all the same size to make transport easier. Points were all to be operated by Fulgurex point motors except the three way.

 

 

The buildings were built to drawings scaled off photos and as they are all typical Bavarian in appearance. A basic plywood shell was used with textured paint for the rendered areas and real wood cladding for the wooden bits. All were individual planks! The roof was wood with resin cast tile details and resin castings from my own patterns were used to make the windows and doors. Full interior detail was included including a risque scene in one of the bedrooms upstairs in the station building

 

 

More soon

 

Kev

[kevsmiththai]

Two hidden sidings served as a fiddle yard at the back and this was hidden by an industrial spur with the Gottersee sawmill and Gottersee brewery.

The Brewery under construction

 

Finished

 

 

Basic operation was for a freight or passenger to come into the station. The loco would uncouple and run onto the headshunt before either running around the train or going onto the loco shed for servicing. Freight trains shunted the spur and the two bay platforms before returning back to the rear sidings

 

The loco shed with a modified and superdetailed Marklin P8

 

[kevsmiththai]

The other P8 4-6-0 and the BR78 4-6-4T wait in the hidden sidings for their next turn

 

 

Exhibition packs were sent to most of the model railway clubs I knew to start getting invites. "Nothing drives a layout construction on like a deadline to get it to show"

Nowadays info packs like this would be done on the computer but back then it was hand drawn and photocopied together. This is a scan of one of the original layout descriptions

 

In the van and ready to go. Dexion racking was used to transport the baseboards and the stockboxes are huge due to the size of the models

 

 

[kevsmiththai]

Set up and ready the punters. Note the complete lack of a lighting rig compared to how we exhibit today

 

 

You can see here how imposing it was at shows compared to the 00/H0 and N scale layouts that used to surround it

 

The Marklin locos were all converted to DC operation and the scratchbuilt locos were built DC from the start. I'd picked up quite a bit of Marklin rolling stock but also wanted to scratchbuild freight vehicles.

 

 

Once again resin casting came into its own with complete wagon kits being made from home made patterns

 

More tomorrow

 

Kev

 

[kevsmiththai]

Figures came from a variety of sources as did the road vehicles. I trawled through all the Military modelling adverts to find suitable items

 

 

The station building

 

 

The sawmill

[kevsmiththai]

For interest the loco stock comprised
BR 38 (P8) 4-6-0 Marklin standard

 

 

BR38 (P8) 4-6-0 Superdetailed, Witte smoke deflectors lightly weathered (see above)

BR 78 4-6-4T Marklin standard

 

BR 80 0-6-0T Marklin weathered

 

 

 

 

BR 80 Marklin superdetailed

 

Edited January 15, 2019 by kevsmiththai
missing pictures

[kevsmiththai]

The Marklin 0-6-0DH was repainted into orange as the Sawmill shunter and there was a green BR80 0-6-0T that also shunted the spur
 

Scratchbuilt Badische Staatsbahn 0-4-0+0-4-0 Mallett

 

 

and the big beast the BR41 2-8-2. way too big for the layout!

 

 

This was more the size of loco it needed. A BR89 0-6-0T

 

 

These days I would have filmed it extensively of course but unless I find someone who filmed it at a show there is no video footage of it. When the house move to the Lake District began to become a reality I realised there would be nowhere to keep it. So it, and all the stock, went to a dealer in the South of England. My wife gasped when she saw the amount on the cheque! Last I heard it was on public display at an equestrian centre somewhere in Wales but I do miss it. I don't think me and the lads ever fully realised its operating potential back in those days

 

[kevsmiththai]

Looking through some unrelated photos the other day I came across these. Not taken by me as I'm on the right in the picture it shows me and Tony Bateman operating at a show. You can get an idea of the size

 

 

Scanned from prints here is the BR 78 4-6-4T shunting the yard as the passenger comprised of 6 wheelers enters the station behind one of the P8s

 

 

Kev

[gavino200]

Fantastic project. Those are some beautiful trains!!