andydoob Posted June 30, 2016 Share Posted June 30, 2016 automatic level crossing - lights flashing, bells sounding but will not stop! Link to comment
POMU Posted June 30, 2016 Share Posted June 30, 2016 andydoob, Unplug the control unit from your power pack and the lights and bells will stop. Replug in a few seconds and it will return to normal. It happens every so often and just needs to be reset. POMU Link to comment
andydoob Posted July 10, 2016 Author Share Posted July 10, 2016 thank you for your reply, I have tried this several times but it will just keep going. Link to comment
Drunkenclam Posted September 4, 2016 Share Posted September 4, 2016 Could be a damaged or faulty photocell in the track or wiring. Have you cleaned them? If possible. With the power off. Disconnect all the detectors. Then turn on. If no lights/bells. Confirms its not getting a trigger input. Then with power off connect one detector then switch on to see response. Its a pain. But thats the best way to test. Becareful with the wiring. Always remove by pulling the plug not the cables Link to comment
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now