Adjustable Circuit Board Holder

[gavino200]

This was definitely an impulse buy. I probably don't "need" it, but I think it'll be useful and make soldering boards a bit more pleasant. I'll add a review after I use it. 

 

https://www.ebay.com/itm/333842548498

 

[cteno4]

I have one of these and I’ve found it handy to hold other bulkier things that are too big for the vise and don’t need a super hard hold. I even thought it may work to hold cards with small parts on for airbrushing as those always fall over or I need to hold them, but havnt tried that yet.

 

it’s nice it comes apart also if you are tight on space. 
 

this is the one I have for working on little PCBs. Easily adjustable. If I need it off the workbench I just clamp it in the pan advise that swivels every which way. I find clamping little pcbs in a thrid hand can be a bit rough and little boards tend to have components very close to the edge. They come up at auction for a couple of bucks.

 

https://www.ebay.com/itm/392293747647?hash=item5b56878bbf:g:WCcAAOSw1OFc02rA

 

jeff

[Kiha66]

I have one of those, it's not something I use for every project but when it need it it is amazing how much easier some projects become.   I recently used mine when I had to solder new leads onto an ESU loksound board.

Edited May 3, 2021 by Kiha66

[chadbag]

interesting.

out of stock.

 

Looks like something I could use when dealing with certain boards

[cteno4]

https://www.amazon.com/AmScope-Adjustable-Circuit-Holder-Clamping/dp/B08HP654RN/ref=sr_1_1_sspa?crid=2IUR17PYMDHQS&dchild=1&keywords=circuit+board+holder&qid=1620107671&sprefix=Circuit+boar%2Caps%2C149&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyMTFBVkowTU1PTk9JJmVuY3J5cHRlZElkPUEwODY3NjE0UEVVQlBaVVdURENNJmVuY3J5cHRlZEFkSWQ9QTEwMDI1NzQzSFBIVDdWQTFOWlZFJndpZGdldE5hbWU9c3BfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==
 

jeff