Jump to content

Recommended Posts

On 4/5/2021 at 10:56 PM, serotta1972 said:

When I’m not on the road driving my semi truck, I go off-roading with my 1/10 scale RC4WD Brand 2 door Hilux. 

 

 

I don't believe you have a Hilux unless it is properly equipped with a Soviet 14.5mm machine gun or some such similar thing...  🤣

  • Haha 1
Link to comment

IJN Type A Ko-hyoteki ready for painting. The model is in 1/72 scale, made by Fine Molds. I'm going to finish it as Sub-Lieutenant Ban's M24. I got this model as I have a personal connection with these vessels and their operation in Sydney.  My father was at the Torpedo Factory on the night of the Sydney Harbour attack, and managed to sleep through the whole thing! A few years ago I did some contract work on the conservation of the preserved composite sub when it was being prepared for display at the Australian War Memorial in Canberra. I've also carried out a field survey of the various harbour defence sites, including the remains of the detector loop installations and boom nets.  So when this model was released I was very keen to get one.

 

It's a simple kit with not many parts, and goes together very nicely with minimal work to clean up the seams on the hull. 
 

spacer.png
 

https://www.navy.gov.au/history/feature-histories/japanese-midget-submarine-attack-sydney-harbour

 

Cheers,

 

Mark.

 

  • Like 3
Link to comment
kevsmiththai

Variations on a theme

 

You've seen bits of these before but thought it was worth pulling them together

 

The venerable Airfix 1/32nd 1904 Mercedes. lurking in my loft were three unbuilt examples. The earliest ones had the original instructions

 

large.1456302132_KRS154N042.jpg.9a0b236d16d6ad906e2b60045a8b50c2.jpg

 

plus one with the slightly later version

large.10729241_KRS154N041.jpg.d57f857f7119b511ef37bd0619733683.jpg

 

Now the car modelled was a race version that was a regular at the Brooklands motor racing circuit and which still survives to this day but its use is a bit limited.

 

These are ancient mouldings, very crude by today's standards but still useable so the first one was the Australian mofified WW1 armoured car used in the Western desert

 

scratchbuilt body from drawing generated from photographs

 

large.352499452_Mercedesarmouredcar.jpg.5675301030739b8b5b9fe1b4953cf66b.jpg

 

I was quite pleased with this one

 

large.1202206175_mercedesAC.jpg.b42bca4ddeeaefe367c4c9b7938b32f7.jpg

 

So, one down, two to go

 

Most of the luxury cars in those days were supplied as a chassis only so your favourite coachbuilder could add a body to your spec, so anything goes really.

 

I speculated that a captured one was converted into a makeshift Military Police Paddy wagon to transfer deserters

 

large.1554393932_1904Mercedespaddywagon.jpg.67c990ac303873a7393b88f31cf3db48.jpg

 

The seat was left over from a Model T conversion and the grills were taken from a sheet of Scalelink diamond mesh

 

looks as if it is abandoned and about to be re-captured by the Kaiser's army

 

large.1924396162_1904MercedesPaddywagon.jpg.9f5ba6fb9909cfcb3fda663251f5e9c1.jpg

 

So that leaves the last one. Still pondering about it but if anybody has got any suggestions let me know.

 

I could model the armoured car again but with the  original turret, but only have one distant picture of it, not really enough to do the turret justice

 

cheers

 

Kev

 

Kev

  • Like 3
Link to comment
  • cteno4 pinned this topic
kevsmiththai

I can see some bits of the Tonda kit getting replaced with scratchbuilt bits. There doesn't seem to make a lot of sense cutting squares and rectangles out of the vacform sheet and then doing all the clening up when it is a lot quicker to cut them out of new sheet.

 

Anyway, progress so far

 

large.1654958285_Bedfordvacform.jpg.fe2da6608ebc07726c75ba27f4dc975c.jpg

 

Lots of steel blocks and engineering V blocks used to keep the chassis square and straght whilst the Revell Contecta was setting. In the background there are now three British 13 pounder QF guns sat on the warflats (and a German 96 n/A 77mm gun), The one in unpainted grey is Brooklyn's first WW1 model. After he made a good job of the Airfix 1/32 Aston Martin we started on the old Airfix 00 scale engine shed (now marketed by Dapol) but to be honest it is not a good kit and there is no chance at present of him having a 00 scale layout so it hasn't got far. So I ordered him an Emhar kit of the 13 pounder and he has made a decent job of it. I've added some of the bits the kit ignores and it is ready for painting. The Emhar kits are a bit crude but they are cheap and a bit of time super-detailing pays dividends

 

large.1369611619_BrooklynsWW113PDRQF.jpg.0585f86da16a97161a71a708d869966a.jpg

 

more soon

 

Kev

 

Link to comment
kevsmiththai

More progress.

 

large_MWC.jpg.d21d4b9da4d900ac903fa8b8cbcb3db9.jpg

 

had to resort to body filler to fit the resin cast wheels onto the axles

 

Looselt assembled

 

large.2014187840_BedfordMWC.jpg.cdbfc28a822e8b6445e91614abf38f44.jpg

 

Let Brooklyn loose with the Hycote plastic primer aerosol and the Rover Brooklands green. Made him stand behind an imaginery line away from the paint bench so he didn't get too close to paint his 13 pdr QF gun

 

large.1725918476_BrooklynandtheGunkithefinished.jpg.3ec890859280ecea720a36557edd33c4.jpg

 

Kev

  • Like 2
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...