Jump to content
Sign in to follow this  
dmustu

Tail Lights for the Kato EF58

Recommended Posts

dmustu

Hello all,

 

I have been adding the detail parts and dcc'ing a Kato ef58 that i've had for some time. When I took the body off, I noticed that there are guides above the cabs for tail lights, as well as the headlights. Shining a light through the body confirmed that the light was delivered to the lenses for the tail lights, so I set about adding some leds to illuminate the tail lights, as there is space to do so.

20180313_171053_resized.thumb.jpg.65b8ffadb16b9f47f066274a988a7010.jpgInside the ef58. LEDs can be added to the grey box at either end of the model. I used 3mm LEDs, pre wired with a resistor. 

20180313_171243.thumb.jpg.9d175d40807c7f16615718b90c586107.jpgGrey box removed. The guide for the headlight lens goes through the gap on the left, you need to drill a hole on the right hand side for the light to pass through.

 

  • Like 1

Share this post


Link to post
dmustu

20180313_163806_resized.thumb.jpg.b878634f897ae6ef4e09d08746076ccf.jpgThe box with the holes made. At the front is where the led will sit, middle and back are for the wires to pass through the box into the body.

20180313_171129_resized.thumb.jpg.e25f3f56b7ccd9eba87bab0f314893ac.jpgLed fitted.

Edited by dmustu
Spelling!
  • Thanks 1

Share this post


Link to post
dmustu

20180313_171335_resized.thumb.jpg.b4508c38e6c5338bcb062ad2c75f9a47.jpgGrey boxes with leds fitted, reattached onto the chassis. Once done, all you need to do is fit the decoder, attach the wires, and seal the leds in with some blu tack to prevent red light leaking into the headlight lens. The model came with yellow leds fitted for the headlights, so I swapped these for some soft white leds to improve the appearance.

  • Thanks 2

Share this post


Link to post
dmustu

 20180316_164108_resized.thumb.jpg.9699abec6c1f41afe76043e6f4337dac.jpg     Headlight on.

20180316_164059_resized.thumb.jpg.597561026173b85c7c82addef8fe0a02.jpg

Headlight off.

 

The red leds are attached to the function 3 and 4 on the decoder, so they can be operated independently of the headlights. The camera makes the red look a bit pink in the photo, but to the naked eye the colour is much more red than it appears in the pictures!

Edited by dmustu
  • Like 3
  • Thanks 2

Share this post


Link to post
Fenway Park

Tail lights only when running light engine. Not hauling any stock. 

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...