Jump to content

What did you do on your layout today? (N scale)


bill937ca

Recommended Posts

I've spent the last couple of days tweaking the scenery, adding some bits and removing others. Also installed a few minor details and now I consider the layout about 95% finished since vehicles and people are pretty much all that the "Tsubuden" still needs. Later on I may go back and add still more detail stuff like junk piles etc. but right now I'm already starting to think about another mini layout, maybe a bit larger this time and with a small town setting instead of a rural one.

  • Like 1
Link to comment

I've been laying out the track, for the three stations using some old Peco track I found in a box.

 

Turns out I only needed to buy one more point to complete them. I think I'll stick with Peco Setrack as it he points are short enough to let me fit everything into the required dimensions! With Kato or Tomix track this just doesn't seem to be possible.

 

This week will be spent trying to arrange the bits in between and tidying up the track lifted from an old layout the never went anywhere...

Edited by AllScales
  • Like 2
Link to comment

This was last week's school project. He had to make a box to put cards in. He got to choose the theme. Now it sits in the train room. It's for "donations" for new trains. 

 

ZEkU2t0.jpg

Edited by gavino200
  • Like 6
Link to comment

Coromant made me a fence/wall for a cemetery to my T-trak modul, so we started to play how to organize the graves. I glued 2 catenary pole holders, built 2 houses from Tomytec kits and made a styrol strip to the graves and weather it. Everything in pictures:

 

post-212-0-03853100-1488612521_thumb.jpg   post-212-0-74497200-1488612524_thumb.jpg   post-212-0-04278600-1488612528_thumb.jpg   post-212-0-50723600-1488612532_thumb.jpg

Edited by IST
  • Like 6
Link to comment

This was last week's school project. He had to make a box to put cards in. He got to choose the theme. Now it sits in the train room. It's for "donations" for new trains. 

 

ZEkU2t0.jpg

Excellent work! :)

 

Cheers,

 

Mark.

  • Like 1
Link to comment

Not much time this WE...

Found some Kato 11-702 knuckle couplers in my box and decided to mod a Tomix Koki which I also have for some time now.

 

post-4432-0-16011800-1488646070_thumb.png

 

Works quite good, however I had to put in again the small spring (contrary to the Kato instructions). Without the spring, the knuckle "rattled" a bit in the Tomix coupler pocket.

Photo shows the final test on my bench, Momotaro had to check...

  • Like 1
Link to comment

Back onto the club 3.0 layout. All the module bases cut out today. Lots of cutting big pieces of wood into small ones! Assembly starts Monday.

 

Jeff

post-24-0-10058100-1488691678_thumb.jpg

  • Like 1
Link to comment

Did some trouble shooting on the number four right turnout, which consistently caused derailment on a few of my trains. Changed out to another one and same issue. The trains run fine on the same but mirror left turnout on the opposite side. Really weird. Couldn't figure out the problem at the end, and just swapped with a #6 turnout instead.

Link to comment

Back to more progress on the club modules. We got about a third of the 40 some odd put together tonight! Amazing thing so far all our measurements and peg system seem to be popping right in!

 

Cheers

 

Jeff

post-24-0-51910400-1488861193_thumb.jpg

post-24-0-01915900-1488861218_thumb.jpg

post-24-0-84768900-1488861230_thumb.jpg

post-24-0-33804100-1488861243_thumb.jpg

post-24-0-22145700-1488861274_thumb.jpg

post-24-0-94193600-1488861292_thumb.jpg

  • Like 9
Link to comment

Meanwhile, deliberations continue as to how to ameliorate this ca. 1 foot (30cm) step from street level to the station. Please ignore the masking tape on the roof, it's been there for the last 6 months while I finally get round to finishing touching up this Tomix classic. Please also ignore the mildly levitating koban to the right,

 

33222532622_ae3f718892_z.jpg

inaka-station by Rail Squid, on Flickr

 

Elsewhere, tram is stopped at tram stop.

 

33222532602_5970f40d74_z.jpg

tram-stop-station by Rail Squid, on Flickr

Edited by railsquid
  • Like 11
Link to comment

Looking really good Squid, the multi level design of the layout and the steep narrow streets have a really realistic countryside look to it

Link to comment

More modules, there must be more modules! The 4 end modules needed special peg holes on the site to link in the front and back modules. Only 4 more to go for the Shinkansen yard, but they need some mods as part of each goes over the yard for the ground level tracks... next it's onto the support grid. I screwed up its 30 modules total.

 

Jeff

post-24-0-22073000-1489299145_thumb.jpg

Edited by cteno4
  • Like 2
Link to comment
Claude_Dreyfus

Converted my recently acquired rake of Taki 1000s to the Kato coupler (11-107). Doesn't narrow the gap much but enough so the couplers no longer look oversized and out of place.

33368452475_21fded1ef0_z.jpg

Kato Taki 1000s with Kato coupler by Rail Squid, on Flickr

You are far more organised then me when it comes to things like this. Those wagons are certainly improved by changing the couplings...I really ought to set about doing this on mine.

  • Like 2
Link to comment

Looking good squid!

 

I wouldn't say the step up from the road to the station entrance is too high... cause judging from the parked van, it is around the same height to climb up the driver side of the van and to climb up the step.... however, usually the van comes with a handle to pull yourself up when you climb into the van so... Perhaps if you are bothered by this you can saw off a step on the right side of the entrance? But then again you will need a railing... Or you could also saw off a gradient ramp running sideways into the station, and can even pass it off as a 'for wheelchair' access... Place a man with a trolley beside the van and it can be passed off as making a delivery into the shop inside the station ~  :)

Link to comment

Back to more progress on the club modules. We got about a third of the 40 some odd put together tonight! Amazing thing so far all our measurements and peg system seem to be popping right in!

Cheers

Jeff

Jeff, you're a module making machine!

Link to comment

They are pretty quick and easy to make, it's just taken more time to have Matthew here to assemble as they are a number of sizes and we have a peg system to hold things together to keep straight so having two heads making sure we don't screw up on the assembly!

 

The 12mm Baltic birch is working well, love the stuff! Saw is as well!

 

Jeff

Link to comment

Almost finished my module for the Layout Award 2017 for Yonanjima Art Factory. Out of the contendants, 10 will be rewarded with their module being exhibited in Hamamatsuchō Station. I'll do some extra detailing a little bit, but I think it's a good filler module which doesn't do too much extra to stand out.

 

IMG_20170313_140715_DRO.jpg

 

IMG_20170313_140843_DRO.jpg

 

IMG_20170313_141007_DRO.jpg

 

IMG_20170313_140855_DRO.jpg

 

With the Skytree Train and 6050 on there, it gets a little Tōbu Nikkō line feeling.

Edited by Kabutoni
  • Like 18
Link to comment

Aaaand double post!

 

Added an extra house, extra bits of green, and some more detail.

 

IMG_20170313_212913_DRO.jpg

 

IMG_20170313_212927_DRO.jpg

 

IMG_20170313_213035_DRO.jpg

 

The shop session today didn't really give me any details to purchase for the module... Although I'd have liked to have weathered the roads a bit, it's good to go.

  • Like 12
Link to comment

I managed to spend some time on Sunday working how to do the power for the various stations in my layout...

 

I had to go back to basics and draw diagrams as it's the first time I'm doing analogue in a very, very, very long time!

Link to comment

Toni,

 

Swipe some of your wife's makeup to weather the roads! Don't tell her I told you to do this though, if you are caught JNS will disavow any knowledge of your action. This post will self destruct in 10 seconds...

 

Jeff

  • Like 2
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...