Jump to content

Small B-Train Layout


kami_illy

Recommended Posts

Hey guys

 

So far I've been more of a collector than a modeler. But now, after collecting quite some B-Trains it is time to give them a playground.

 

post-360-0-55396400-1469998755_thumb.jpg
post-360-0-06347900-1469998789_thumb.jpg
 

Until now i put a temporary table top layout. Being inspired by this awesome layout by nick i am starting to plan and hopefully build a permanent layout for B-Trains. 

 

So far i came up with this:

 

post-360-0-51184700-1469998687_thumb.jpg
 

What do you think?

Link to comment

It looks like a nice Kato unitrack setup. The only thing to watch for are the grades as btrains aren't much better in ramp climbing than most scale models. I assume the platform lengths are enough for your trains.

  • Like 2
Link to comment

Thanks guys. Yes, the plan is based on the unitrack 150 /183 compact curves. 

@kvp: I checked the grades (professionally with some legos ;) ) and it seems to work. The clearance under the overpass will be about 5cm which means the loop will lift 1,5cm in the curve and the branch line has to decline 3,5cm...

 

post-360-0-37556700-1471687634_thumb.jpg post-360-0-10479000-1471687648_thumb.jpg

 

The trains seem able to deal with that though starting a long train on the slope might not work (the 7 car hokutosei / cassiopeia with just the motorized loco pulling). 

The platform will be kit bashed from two No.4 platform ends and a roof. This will be enough to barely fit an 8-car shinkansen or sleeper train (assuming the drivers don't want to get on or off the train. Maybe i will give them a little service platform on the outer side to do so)

 

post-360-0-02454700-1471688026_thumb.jpg post-360-0-54357200-1471688095_thumb.jpg

 

Since it will take some time until i can start to actually build the layout, i was "checking" the plans in 3D... 

 

post-360-0-53066200-1471686895_thumb.jpg post-360-0-57797700-1471686929_thumb.jpg post-360-0-11650500-1471686958_thumb.jpg

 

I am kind of happy with the city part. The rural part needs some more work and i feel the little shrine in the back needs something to not get lost there. On the other hand i like the contrast between the compact build modern area and the little fragile relict from the past. 

 

 

Edited by kami_illy
  • Like 3
Link to comment

This whole 3D building is great. I see it as a good tool to get an idea of the whole thing before you invest in structures you might not need in the end.

I was getting into some kind of 3D-mania for a moment and started to check the option of including a subway circle to the whole thing. The way i tried it now will need another module to make any sense for running operations but seems to be a lot of fun. 

 

post-360-0-81028300-1471689108_thumb.jpg post-360-0-45670500-1471689130_thumb.jpg post-360-0-65013200-1471689148_thumb.jpg 

 

Not sure about this though.

Another thought was to connect the underground loop with the branches and use it as the connection between the two upper loops. Or having three individual loops with the possibility of connecting to another module via branches... so many choices.

  • Like 1
Link to comment

i am using SketchUp. It originates from the modeling of the 3D-view in google earth.

It is fairly easy to use. Once you grasp the logic of the tools you can develop your skills pretty fast. But since it is a free program, there are some limitations though. Or you pay for the pro-version with advanced data-handling, rendering machines and so on. But with the free one you should be able to do almost anything you need. 

Really interesting is the access to a big mainly free library where you can find models of buildings, cars, trains, people, etc... 

Link to comment

Despite a lot of work and having a toddler at home i managed to go a bit further with my layout. 

 

i studied the possibility of adding another brach line from the outer loop. And connect the branch of the inner loop with the subway lines. This way i could connect both loops to another module later and transfer from subway to surface operation (like the toyoko and so).  

 

post-360-0-15469600-1473545668_thumb.jpg

post-360-0-55428900-1473545650_thumb.jpg 

 

Now the whole thing seems to get a bit complex. Maybe i should stick to the original concept and add up some scenery. The possible operations are a bit compromised though.

 

post-360-0-48660300-1473545807_thumb.jpg

 

Any thoughts or suggestions?

  • Like 2
Link to comment

Kami,

 

Do you have any track? If so mock this up with the track and just mock up buildings (or plunk down any you have) is and scenery with taped up cardboard boxes and crumpled paper. You will be surprised how much playing with the actual thing will help clear your head some and maybe refocus you on what you find most interesting and fun or find some new ideas and solutions.

 

Cheers

 

Jeff

Link to comment

Hi Jeff, 

 

yeah. i have some track, did some mock up already.

 

post-360-0-43645200-1473713554_thumb.jpg

 

Thats when i discovered that the trains can enter the loop normally but have to back up for leaving the loop. For EMUs and so on this is ok. With loco hauled trains that is another story... 

 

I am tending to pursue the bigger version. Then i would have the outer loop to be entered and left on separate sidings. The inner loop ist connected to the subway loop.

 

The question now is if i go for the more complicated 'full' version or maybe stay simple for learning by trail-and-error.. 

I guess, in the end family life, money and time will decide on that.

 

  • Like 3
Link to comment

Kami,

 

Hey great, that's good as once playing with the trains you notice those practical things that may not show up in the cad! Also just plain crankiness at times with the trains,miracle configurations, etc.

 

Maybe add some track and see how long until it feels right, then redistribute from there?

 

Time and money are always a factor! But being happy with the path you get on is important too for the investments you will put into the layout. Luckily you are small enough to at least get a feeling for things playing some like this compared to a big layout!

 

Keep fiddling and running trains to get honed in on what you really like to do and works best with the btrains.

 

Cheers

 

Jeff

  • Like 1
Link to comment

It's been some days since my last post. Time has been busy with work, travels and family. I didn't get to go much forward with building anything but i decided for a track plan. I won't be doing the underground lines. It's too much work for now. I will include another side track though. 

 

Here are some updated images of the 3D-modell.

 

post-360-0-38793000-1479246013_thumb.jpg

post-360-0-65764900-1479246026_thumb.jpg

post-360-0-90470800-1479246289_thumb.jpg

post-360-0-36925900-1479246298_thumb.jpg

 

  • Like 2
Link to comment

Are the buildings to the dimensions of actual tomix/kato buildings?  The biggest issue with urban layouts I have found to be having the cramped feeling of buildings like the prototype while using off-the-shelf buildings. 

 

Regards,

 

Nick

  • Like 1
Link to comment

Thanks for the support guys. 

 

Indeed, now its time to get it done... Some little more tests with the incline issue and then..!

 

 

Are the buildings to the dimensions of actual tomix/kato buildings?  The biggest issue with urban layouts I have found to be having the cramped feeling of buildings like the prototype while using off-the-shelf buildings. 

 

Regards,

 

Nick

 

I took some care of getting the dimensions as correct as possible. Since i didn't buy any of the buildings yet, i had to get the size and infos form the web. There is of course some room for error since most of the spec sheets or infos are a bit rough (they don't say if the height includes the roof topping / bill boards.. or if the size is the actual footprint of the building or the base plate). 

 

But the dimensions shouldn't be much off, i hope. 

One of the next steps is to buy some of the buildings and see how good the 3D model really is ;)

 

Updates soon, and Nick; congrats on your layouts. As I said before your first b-train layout was what inspired me to plan/build my own.  :icon_thumright:

Link to comment

I just realized that i didn't post anything in months... time is flying by! 

To be honest, there is not much progress on the project either. I added some small details on the 3-d model but thats it. 

 

post-360-0-45132900-1498082211_thumb.jpgpost-360-0-67112400-1498082222_thumb.jpgpost-360-0-65350500-1498082232_thumb.jpg

 

Also I tried to shoot another line up of my trains since the collection grew over the time of this thread. 

 

post-360-0-13926000-1498082384_thumb.jpg

 

I think this is the last time i can manage to squeeze all trains in one photo. The next 8-car Shinkansen is already on its way, hehe. 

  • Like 3
Link to comment

still no analog version of this layout... and only detailing or minor changes done on the digital model. 

 

What do you guys think of the road markings? For me they make sense and have that Japanese feel, but please feel free to tell me if there should be essential mistakes!

 

783500727_layout817.thumb.jpg.0f70f832a40c7423ab6b4c11ef027b99.jpg

 

  • Like 6
Link to comment

But my collection of b-trains is growing (though at a low pace thanks to the inactivity of Bandai)...: 

 

51444727_Foto404_04.19125649.thumb.jpg.3984848466d3c06d6ca663ae9adeedb5.jpg1558966949_Foto504_04.19130630.thumb.jpg.8529eb77744a21c86a6928cd63dbfedc.jpg619153472_Foto604_04.19131848.thumb.jpg.c769c998d63fe585aa2c781cb1374368.jpg

 

 

 

 

  • Like 3
Link to comment

and a little special friend (work in progress): 

 

1945796185_Foto04_04.19132210.thumb.jpg.a3ebf9328919087147d53b85519ab72e.jpg

 

the Tokyo "Green Frog" outside Shibuya station with the decorations it had in 2014. 

  • Like 5
Link to comment

So, i am currently sick at home and have some time to "play" 

 

Since i got a bit stuck with this layout i needed to put the tracks and run some trains for motivation. Also it gave me the chance to print a part of the digital model and put some simple make shift buildings to see if it checks out.  So far i am pretty satisfied.

 

217451846_Foto20_05.19141807.thumb.jpg.9a5e8bb21955d91c0c084581b665e6fb.jpg

 

Link to comment

But the bus terminal is not working like that. Even for city buses it is way too tight and the poor highway busses have no chance at all to enter/leave...

 

1117979931_Foto20_05.19100423.thumb.jpg.faf6f293974ca1cbdc49847ee867b0c7.jpg

211174185_Foto20_05.19100508.thumb.jpg.88ee2f6d4cfc050534fc8f463d199145.jpg

 

So i changed it to that, lets see if this is working out..! Also i softened some of the corners.

 

 

747339318_layout903.thumb.jpg.15ee8fb4114a28ed83e0c21485c25330.jpg

Edited by kami_illy
  • Like 6
Link to comment

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...